..:: DK SIGNAL ::..
    DK PA-Systems  
    High Power Aluminum Speaker  
    TU 300/400  
    Siren Horn Loudspeakers  
    TC 50F  
    TC 100  
    TC 100L  
    TC 100H  
    Paging Horn Speaker  
    TC 301/301U  
    TC 201/201U  
    TC 30  
    Paging Horn Speaker with Transformer  
    TC 15T  
    TC 30T  
    Plastic Horn Loudspeaker  
    30 Watt Plastic Horn Loudspeaker  
    15 Watt Plastic Horn Speaker  
    Ceiling Loudspeaker  
    Ceiling Loudspeaker Standard  
    Fire-proof type Ceiling Loudspeaker  
    Polymer Version Ceiling Loudspeaker  
    Sound Bowl Ceiling Loudspeaker  
    Spherical Ceiling Loudspeaker  
    Driver Unit  
    DKU 15-35F  
    TU 15L-50N  
    DKU 60F  
    DKU 100F  
    Driver Units with Transformers  
    Siren Driver Unit  
    DKU 60N  
    DKU 100N  
    DK Security Systems  
    Digital Surveillance  
    PCI based DVR  
    USB 2.0 - DVR  
    Wireless Appliance  
    Wireless Security Digital Photo Frame  
    Wireless AV signal transmitter  
    DK Safety Warning Systems  
    Siren 250-4000  
    Electronic Siren  
    Siren 250-2000 M05  
    Siren 250 M05  
    Siren 500 M05  
    Siren 1000 M05  
    Siren 2000 M05  
    Siren 250-2000 M10  
    Siren 250 M10  
    Siren 500 M10  
    Siren 1000 M10  
    Siren 2000 M10  
    Mobile Siren  
    Mobile Siren M250  
DK Safety Warning Systems Siren 250-2000 M05 Siren 1000 M05
(1) The Siren 1000 M05 electronic siren serves to alert the fire and rescue services and to warn the public in the event of an emergency.

(2) The system consists of an electronic control unit and eight acoustic radiators. The current required for operation is taken from two absolutely maintenance-free lead batteries. Prolonged operation is guaranteed even in the event of a power failure. Mains-independent operation on a solar power supply is also possible as an option.

(3) The control unit contains 4 short-circuit proof, overtemperature-protected low frequency amplifiers with 250 Watt output power each.

(4) Digital signal processors DSP generate the necessary audio frequency signals, control and monitor the power output stages and simultaneously measure the functionality of the acoustic radiator systems connected to the outputs. Differences in impedance of the radiators, variation in voltage of the batteries are also monitored and automatically set, if necessary, to the nominal power output.

(5) The SLG98 power supply unit provides a temperature-compensated and conserving charging of the batteries. It also supplies the voltages required for the system. feeding of a two way-radio a 12 volts / 0.4 A power supply is already built in. This unit also contains the charge controller for an alternative solar energy supply.

(6) The individual components are linked by the connection card VPE98. The optocoupler inputs also on this guarantee electrical isolation from external devices.

(7) A notebook or a service device can be connected via a programming adapter to a 37-pin SUB-D socket. This can be used to check the operating states of the system and load new program routines.

(8) The various terminals, fuse holders and an overvoltage protection element for the 230 V mains supply voltage are located on the mounting rail. An optional overvoltage protection can be installed in the antenna cable.

(9) The complete electronics, including the batteries are installed in a steel cabinet with the dimensions 600x1000x250mm. The cabinet is electrophoretically dipped and powder coated with RAL 7032.

(10) The cable inlets for mains and external alarm generators and the acoustic radiators are on the bottom of the machine.

(11) The basic equipment includes a connection possibility for an external radio control as well as a fire and fire drill alarm.

(12) A radio control and a handheld microphone with preamplifier can be integrated in the cabinet as options.

(13) The outdoor unit consists of eight acoustic radiators with the appropriate flanges and covers. They are made of corrosion-resistant diecast aluminum. All screws and fastenings are made of stainless steel. An antenna carrier can be mounted optionally.

(14) The use of high-quality, reliable components mean that no maintenance work is necessary in the whole system.

(15) The required technical data are fully complied with in a temperature range from -40° to +70° Celsius. However, the use of lead batteries restricts the application to-25° Celsius. In this range the capacity may drop dependent to the load.

Technical Data

Technical data acoustic radiators



Acoustic radiators 180° formation



Sound level
113,0 dB(C) Leq Average in 30m
Sound radiation
Basic frequency
Number of horns
Intermediate flange
Siren driver
Cover plate
Antenna flange
Screw set
Connector plug
Total weight
Total height
820 x 160mm

Acoustic radiators 90° formation


Sound level
111,5 dB(C) Leq Average in 30m
Sound radiation
Basic frequency
Number of horns
Intermediate flange
Siren driver
Cover plate
Antenna flange
Screw set
Connector plug
Total weight
Total height
 x 820mm


Number of power amplifiers
Output power
1000W (reducible via software download in steps)
Number of different signals
2, optional up to 7
1 external clock input
Battery voltage / capacity
24V / 55Ah
Mains voltage
230V AC
Power consumption at rest with charged batteries
Number of alarms in event of power failure
at least 20 siren alarms of 1 min. duration over a period of 10 days at above 0°C
Temperature range electronics
-40°C to +70°C
Temperature range battery
-25°C to +60°C
Cabinet dimensions
600 x 1000 x 250mm (W x H x T)




OPT-Siren 040
Local microphone (handheld microphone with preamplifier)
OPT-Siren 060
Solar operation
OPT-Siren 070
Antenna surge voltage conductor
OPT-Siren 080
Antenna carrier
OPT-Siren 090
Holder for remote control receiver
OPT-Siren 100
100V-ELA technique
OPT-Siren 120
Programming adapter



Designed by jddt